船舶建造合同 英文.docx
《船舶建造合同 英文.docx》由会员分享,可在线阅读,更多相关《船舶建造合同 英文.docx(41页珍藏版)》请在得力文库 - 分享文档赚钱的网站上搜索。
1、编号:时间:2021年x月x日书山有路勤为径,学海无涯苦作舟页码:第41页 共41页SHIPBUILDING CONTRACT FOR CONSTRUCTION OF ONE (HULL NO. ) BETWEEN as BUYER and SHIPYARD as SELLER SHIPBUILDING CONTRACT FOR CONSTRUCTION OF ONE DEADWEIGHT (HULL NO. ) This CONTRACT, entered into this day of by and between , a corporation organized and existi
2、ng under the Laws of , having its registered office at (hereinafter called the Buyer ) on one part; and Shipyard, a corporation organized and existing under the Laws of Peoples Republic of China, having its registered office at , the Peoples Republic of China (hereinafter called the Seller) WITNESSE
3、S In consideration of the mutual covenants contained herein, the Seller agrees to build, launch, equip and complete at the Sellers Shipyard and to sell and deliver to the Buyer after completion and successful trial one (1) Vessel as more fully described in Article I hereof, to be registered under th
4、e flag of and the Buyer agrees to purchase and take delivery of the aforesaid Vessel from the Seller and to pay for the same in accordance with the terms and conditions hereinafter set forth. ARTICLE I DESCRIPTION AND CLASS 1. DESCRIPTION: The Vessel is a metric tons deadweight, at designed draft of
5、 meters (hereinafter called the Vessel) of the class described below. The Vessel shall have the Sellers Hull No. and shall be constructed, equipped and completed in accordance with the following Specifications: (1)Specification (Drawing No. ) (2)General Arrangement (Drawing No. ) (3)Midship Section
6、(Drawing No. ) (4)Makers list (Drawing No. ) Attached hereto and signed by each of the parties to the Contract (hereinafter collectively called the Specifications), making an integral part hereof. 2. CLASS AND RULES The Vessel, including its machinery and equipment, shall constructed in accordance w
7、ith the rules and regulations (hereinafter called the Classification Society) and shall be distinguished in the record by the symbol of , , , , , and shall also comply with the rules are regulations as fully described in the Specifications. The Seller shall arrange with the Classification Society as
8、sign a representative or representatives (hereinafter called the Classification Surveyor) to the Sellers Shipyard for supervision of the construction of the Vessel. All fees and charges incidental to Classification and to comply with the rules, regulation and requirements of this Contract as describ
9、ed in the Specifications issued up to the date of this Contract as well as royalties, if any, payable on account of the construction of the Vessel shall be for the account of the Seller, except as otherwise provided and agreed herein. The key plans, materials and workmanship entering into the constr
10、uction of Vessel shall at all times be subject to inspections and tests in accordance with the rules and regulations of the Classification Society. Decisions of the Classification Society as to compliance or noncompliance with Classification rules and regulations shall be final and binding upon the
11、parties hereto. 3. PRINCIPAL PARTICULARS AND DIMENSIONS OF THE VESSEL (a) Hull: Length overall abt: . m Length between perpendiculars . m Breadth . m Depth . m Design Draft . m (b) Propelling Machinery The Vessel shall be equipped, in accordance with the Specifications, with type Main Engine. 4. GUA
12、RANTEED SPEED The Seller guarantees that the trial speed, after correction, is to be not less than nautical miles per hour on the loaded condition stipulated in the Specification. The trial speed shall be corrected for wind speed and shallow water effect. The correction method of the speed shall be
13、specified in the Specifications. 5. GUARANTEED FULE CONSUMPTION The Seller guarantees that the fuel oil consumptions of the Main Engine is not to exceed grams/ brake horse power/ hour at normal continuous output at shop trial based on diesel fuel oil having a lower calorific value of , kilocalories
14、per kilogram. 6. GUARANTEED DEADWEIGHT The Seller guarantees that the VESSEL is to have a deadweight of not less than, metric tons at the designed loaded draft of meters in sea water of 1.025 specific gravity. The term, Deadweight, as used in this Contract, shall be as defined in the Specifications.
15、 The actual deadweight of the Vessel expressed in metric tons shall be based on calculations made by the Seller and checked by the Buyer, and all measurements necessary for such calculations shall be performed in the presence of the Buyers supervisor (s) or the party authorized by the Buyer. Should
16、there be any dispute between the Seller and the Buyer and the Buyer in such calculations and/ or measurements, the decision of the Classification Society shall final. 7. SUBCONTRACT: The Seller may, at its sole discretion and responsibility, subcontract any portion of the construction work of the Ve
17、ssel to experienced subcontractors, but delivery and final assembly into the Vessel of any such work subcontracted shall be at the Sellers Shipyard. The Seller shall remain responsible for such subcontracted work. 8. REGISTRATION: The Vessel shall be registered by the Buyer at its own cost and expen
18、se under the laws of at the time of delivery and acceptance thereof. ARTICLE I CONTRACT PRICE & TREMS OF PAYMENT 1. CONTRACT PRICE: The purchase price of the Vessel/7 is United States Dollars (US $), net receivable by the Seller (hereinafter called the Contract Price), which is exclusive of the cost
19、 for the Buyers Supplies as provided in Article V hereof, and shall be subject to upward or downward adjustment, if any, as hereinafter set forth in this Contract. 2. CURRENCY: Any and all payments by the Buyer to the Seller under this Contract shall be made in United States Dollars. 3. TERMS OF PAY
20、MENT: The Contract Price shall be paid by the Buyer to the Seller in installments as follows: (a) 1st Installment: The sum of United States Dollars (US $ ) , representing percent ( %) of the Contract Price, shall become due and payable and be paid by the Buyer concurrently with this contract being s
21、inged and provided that Seller shall have submitted to the Buyer the Refund Guarantee in the form annexed hereto as Exhibit A issued by Bank of China, Beijing, the Peoples Republic of China, and provided further that the Seller shall have received the first class international banks Letter of Guaran
22、tee in accordance with Paragraph 6 of this Article. (b) 2nd Installment: The sum of United States Dollars (US $ ), representing percent ( %) of the Contract Price, shall become due and payable and be paid within three (3) bank business days after the cutting of the first steel plate of the Vessel in
23、 the Sellers workshop. The Seller shall notify with a telex or telefax notice to the Buyer stating that the 1st steel plate has been cut in its workshop and demand for payment of the installment as soon as the cutting of the steel is made. (c) 3rd Installment: The sum of United States Dollars (US $
24、), representing percent ( %) of the Contract Price, shall become due and payable and be paid with in three (3) bank business days after keel-laying of the first section of the Vessel. The keel-laying shall be notified by the Seller with a telex or telefax notice to the Buyer stating that the said ke
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 船舶建造合同 英文 船舶 建造 合同
限制150内