《切割片,角磨片、旋转锉-温特、马圈.ppt》由会员分享,可在线阅读,更多相关《切割片,角磨片、旋转锉-温特、马圈.ppt(16页珍藏版)》请在得力文库 - 分享文档赚钱的网站上搜索。
1、切割和打磨切割或打磨片钨钢旋转锉 适合钢,不锈钢和石材等不同材质的全系列切割,打磨产品 超薄切割片可以获得最小的耗损,同时最大的磨具寿命 超级性能Premium级别Type 27打磨片适合重型打磨,适合钢或不锈钢材质 所有产品均有国际磨具安全OSA认证 钨钢旋转锉能提供稳定的切削和较长的 磨具寿命具有多种形状规格尺寸和刀路选择,适 合绝大多数应用情况Cutting&GrindingCutting&Grinding 适合多种不同工件材质 (钢,不锈钢,石材)请参考标签颜色指南 配合角磨机各种不同尺寸 以最高质量标准生产以保证最佳应用性能切割和打磨片Cutting&Grinding标签颜色指南Cu
2、tting&GrindingISO-质量认证A:氧化铝C:碳化硅Z:氧化锆30:粒度 (4 24=粗 30 60=中 70 222=细)U:硬度 (A=软 到 Z=硬)BF:合成树脂黏结剂复合玻璃纤维增强Cutting&Grinding可供选择的形状尺寸和厚度 形状(切割片):尺寸(切割片):形状(砂轮片):尺寸(砂轮片):种类 41种类 42直径 从 100mm 到 400mm厚度 从 1,0mm 到 3,0mm种类 S27直径 从 100mm 到 230mm厚度 6,0mm 和 7,0mm种类 42 的优点特有更高的边缘稳定性吸收振颤最小的边缘拉伸效应最小的热胀效应最紧压工件的切割l不需要
3、更大直径的法兰压盘缺点 凹陷的中心会阻碍完全深入切割Cutting&Grinding应用Cutting&Grinding应用铁轨维护Cutting&Grinding应用去除焊缝Cutting&Grinding Precision machine ground and balanced Guarantee smooth performance and a long tool life Different shapes,cuts and shanks Use on Die and Straight Grinders and flexible shafts钨钢旋转锉Cutting&Grinding
4、most popular choice for rapid stock removal on Carbon and Stainless Steel Produces smaller chips Provides better operator control Excellent finish不同刀路 Very open,coarse cut aggressive stock removal on Aluminium,Non-Ferrous materials,Plastics and Fiberglass Open flutes resists loading on softer materi
5、alsNon-Ferrous CutDouble CutCoated Abrasives温特磨料中国总代理:广州泛音机电有限公司新浪微博:磨料人温特Cutting&Grinding many common sizes available in extended 150mm long shanks for hard to reach applications Custom length available on special request柄种类 all shapes available as miniature versions on 3mm shank for detailed workSmall DiameterExtended LengthCutting&Grinding应用Cutting&Grinding形状SACylinderSBCylinder with End CutSCRadius End CylinderSDBallSEOvalSFRadius End TreeSGPointed TreeSLRadius End TaperSMCone
限制150内