考虑回收成本结构的两期闭环供应链定价策略研究.docx
《考虑回收成本结构的两期闭环供应链定价策略研究.docx》由会员分享,可在线阅读,更多相关《考虑回收成本结构的两期闭环供应链定价策略研究.docx(77页珍藏版)》请在得力文库 - 分享文档赚钱的网站上搜索。
1、 分类号: F274 密级: 公开 UDC: 658 学校代码: 11065 硕士学位论文 考虑回收成本结构的两期闭环供应链定价策略研究 杨 春 苗 指 导 教 师 戴 更 新 教授 孙浩 副教授 学科专业名称 管 理 科 学 与 工 程 论文答辩日期 2016 年 5 月 29 日 摘要 随着可持续发展观念的普及和人类环保意识的提高,闭环供应链因为其节约资 源和减少污染的双重环保特性成为供应链中的研究热点。本文基于差别定价,建立 了考虑回收成本结构的两期动态博弈闭环供应链模型,分别研究制造商再制造、经 销商再制造和第三方再制造三种模式下,回收成本结构对回收努力程度、节点企业 定价策略和闭环供
2、应链利润的影响,具有一定的理论意义和现实意义。 文章首先关于回收成本结构进行了假设与分析,建立了回收成本结构模型;然 后对不同回收成本下的三种再制造模式进行了横向和纵向的比较分析;最后通过模 型解析和数值仿真分析,得出了以下主要结论。( 1)回收成本为规模经济时,再制 造行为获利较高,再制造方回收努力程度高,再制造产品对新产品市场的冲击较大。 规模不经济时,再制造行为获利较低,再制造方回收努力程度低,再制造产品对新 产品市场的冲击较小。( 2)回收成本为规模经济时,第三方再制造模式对供应链总 利润最为不利。消费者偏好较低时,经销商再制造模式对供应链总利润最为 有利; 消费者偏好较高时,制造商再
3、制造模式对供应链总利润最为有利。规模不经济时, 高回收成本使得三种再制造模式的回收努力程度均较低,第三方再制造模式可以使 供应链总利润达到最优。( 3)无论是回收成本的规模经济还是不经济,第三方再制 造模式对制造商均不利,出于对市场原产品制造商的保护,应对第三方再制造商收 取一定的专利费用改善原制造商与第三方之间的博弈关系,减轻第三方再制造商的 威胁。 关键词:闭环供应链;回收成本结构;两期动态博弈;再制造模式 Abstract With the popularization of the concept of sustainable development and the improveme
4、nt of the consciousness of environmental protection, the closed-loop supply chain has become a research focus because its dual protection of resources and reducing the pollution. Based on differential pricing, we establish the two-period dynamic game models of closed-loop supply chain under recyclin
5、g cost structures. Considering three modes include that manufacturers remanufacturing, dealers remanufacturing and the third party remanufacturing, cost structure show to influence collection effort, the node enterprise pricing strategy and the closed-loop supply chain profit, has certain theory sig
6、nificance and the practical significance. Firstly, on a cost recovery structure assumptions and analysis, the establishment of a cost recovery structure model. Then three different cost recoveries under the roman- facturing model of horizontal and vertical comparative analysis. Finally, simulation a
7、nalysis by analytical and numerical models to give the following main conclusions. Cost recovery when economies of scale, higher profit behavior remanufacturing, recycled and then producing a high level of effort, remanufacturing greater impact on the product market of new products. When diseconomie
8、s of scale, lower profit remanufacturing behavior, remanufacturing low side recovery effort, the impact of new product remanu- facturing market is small. Cost recovery when economies of scale, then a third-party manufacturing model for the total supply chain profits the most disadvantaged. Consumers
9、 prefer low remanufacturing auto mode the total supply chain profits most favorable; when higher consumer preferences, manufacturers remanufacturing mode the total supply chain profits most favorable. When diseconomies of scale, high recovery costs make three kinds of manufacturing mode and then the
10、 degree of recovery efforts are low, then the third-party manufacturing model allows the supply chain to achieve optimal overall profits. Whether it is the economies of scale or cost recovery uneconomical third-party remanufactured mode manufacturers are unfavorable, out of the market by the origina
11、l manufacturer of protection, and then to deal with a certain amount of third-party manufacturer royalties improve the original manufacturer of the first Game tripartite relationship between the third party and then to reduce the threat of the manufacturer. Key Words: Closed-loop supply chain; Colle
12、ction cost structure; Two-period dynamic game; Remanufacturing modes 论文 “考虑回收成本结构的两期闭环供应链定价策略研究 ”得到以下项目资助: 1 国家自然科学基金项目:多期环境下再制造闭环供应链的定价策略研究 ( NO:71202142)。 2山东省自然科学基金项目: EDI 环境下基于信任机理的供应商产量决策研究 ( NO:ZR2015GM001)。 目录 第一章绪论 .1 1.1 研究背景 .1 1.2 研究意义 .1 1.2.1 理论意义 .2 1.2.2 现实意义 .3 1.3 国内外研究综述 .3 1.3.1 关
13、于闭环供应链管理的研究综述 .3 1.3.2 关于回收再制造模式和差别定价的研究综述 .5 1.3.3 关于两周期模型和回收成本结构的研究综述 .6 1.4 主要研究内容及创新点 .7 1.4.1 主要研究内容和研究框架 .7 1.4.2 本文创新点 .9 1.5 研究方法和技术路线 .9 第二章关于回收成本结构的假设与分析 .11 2.1 回收成本结构的存在背景分析 .11 2.1.1 回收渠道和回收方法的差异化 .11 2.1.2 回收成本结构的存在案例 .12 2.2 回收成本结构模型 .13 2.2.1 回收成本结构问题描述 .13 2.2.2 回收成本结构模型假设 .14 2.3 本
14、章小结 .15 第三章制造商再制造模式( MR)两期闭环供应链定价策略研究 .16 3.1 问题描述和基本模型假设 .16 3.2 规模经济下两期闭环供应链模型 .19 3.3 规模不经济下两期闭环供应链模型 .21 3.4MR 模式下的数值仿真比较分析 .24 3.4.1 均衡决策数值仿真比较分析 .24 3.4.2 利润、需求量的数值仿真比较分析 .27 3.5 本章小结 .29 第四章经销商再制造模式( DR)两期闭环供应链定价策略研究 .30 4.1 问题描述和基本模 型描述 .30 4.2 规模经济下两期闭环供应链模型 .31 4.3 规模不经济下两期闭环供应链模型 . 34 4.4
15、DR 模式下的数值仿真比较分析 . 36 4.4.1 均衡决策数值仿真比较分析 . 37 4.4.2 利润、需求量的数值仿真比较分析 . 39 4.5 本章小结 . 41 第五章第三方再制造模式( TPR)两期闭环供应链定价策略研究 . 43 5.1 问题描述和基本模型假设 . 43 5.2 规模经济下两期闭环供应链模型 . 44 5.3 规模不经济下两期闭环供应链模型 . 47 5.4 TPR 模式下的数值仿真比较分析 . 49 5.4.1 均衡决策数值仿真比较分析 . 49 5.4.2 利润、需求量的数值仿真比较分析 . 52 5.5 本章小结 . 54 第六章三种再制造模式最优决策的比较
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 考虑 回收 成本 结构 闭环 供应 定价 策略 研究
限制150内