出口产品运输包装标准(最终版).doc
《出口产品运输包装标准(最终版).doc》由会员分享,可在线阅读,更多相关《出口产品运输包装标准(最终版).doc(12页珍藏版)》请在得力文库 - 分享文档赚钱的网站上搜索。
1、1适用围Scope of application本标准规定了常西电变压器XX公司所生产的出口变压器产品运输包装的总体要求、包装方式、包装箱技术要求、装箱方法、装箱流程、包装标识等主要容。适用于本公司经铁路、公路与海洋运输的出口产品包装。The standard stipulates the general requirements which include packing way, packing technical requirements, encasement method, encasement procedure and packing identification etc. of
2、 transport package for export transformer produced by Changzhou XD Transformer Co. Ltd. It applies to export product packing by railway, highway and ocean transportation.2 引用标准 Quoted criteria下列标准所包含的条文,通过在本标准中引用而构成本标准的条文。本标准出版时,所有标准均为有效。所以标准都会被修订,标准使用方应探讨使用下列标准最新版本的可能性。Provisions contained in the f
3、ollowing standard form the standard provision by quoting in this standard. When the standard published, all the standards are valid. All the standards will be revised. Standard users shall explore the possibility of using the latest version of the following criteria.GB/T 7350-1999 防水包装 GB/T 7350-199
4、9 Water-proof packingGB/T 155-2006 原木缺陷 GB/T 155-2006 Defects in logsGB/T 4823-1995 锯材缺陷 GB/T 4823-1995 Defects in swan timberGB/T 9846.3-2004 胶合板 第3部分:普通胶合板通用技术条件GB/T 9846.3-2004 Plywood The third part: General technical conditions of ordinary plywoodGB/T 7284-1998 框架木箱 GB/T 7284-1998 Frame wooden
5、caseGB/T 5048-1999 防潮包装 GB/T 5048-1999Damp-proof packingGB/T 6388-1986 运输包装收发货标志 GB/T 6388-1986 Transport package shipping markGB/T 13384-2008机电产品包装通用技术条件GB/T 13384-2008 General technical conditions of mechanical and electrical products packingSN/T 0273-2002进出口商品运输包装木箱检验检疫规程SN/T 0273-2002 Import and
6、 export goods transport packaging wooden box, inspection and quarantine procedures3 总则 General3.1 产品包装应符合牢固、经济、合理、美观的原则。在正常的储运、装卸条件下应保证产品自工厂发货之日起,至少两年不因包装不善而产生残损、散失、锈蚀甚至影响产品性能等现象,确保产品能安全、迅速、完整无损地到达目的地,与时交付用户使用。Packaging of products should accord with strong, economic, reasonable and beautiful princi
7、ple.Under the condition of the normal storage and transportation, loading and unloading shall ensure that product from the date of shipments, in at least two years there would not come into damaged, lost, corrosion even affecting properties of products etc. phenomena. To make sure the products can a
8、rrive at the destination safely, rapidly and in one piece and deliver to the customers in time.3.2 应根据包装物品的性质、重量、外形尺寸、流通环境条件和用户要求,选择正确的包装方式,做到包装紧凑、防护合理、安全可靠。We should choose the right modes of packing according to nature, weight, boundary dimension, circulation environment conditions and customers r
9、equirements of packing goods to make the packaging compact, protection reasonable and safe and reliable.3.3 产品必须经检验合格、组部件齐全,做好防护处理后,方可进行包装。随机文件应齐全。The products should be qualified through inspection. The parts should be complete. The products can be packed till the protection being done well. Random
10、 file should be complete.3.4包装箱的外形尺寸与重量应符合国外运输方面的有关超限、超重的规定。Boundary dimension and weight of packing case should be accorded with domestic and international transport regulations on overrun, overweight.3.5 包装环境应清洁、干燥、无有害物质。Packaging environment should be clean, dry and with no harmful substances.3.6
11、 为降低成本,有原包装的应尽量利用原包装,经修理或改装的包装箱应符合专业包装的有关标准要求。In order to reduce costs, ones with the original packaging should try to use the original packaging. Packing cases after the repair or modification shall accord with the relevant standards of professional packaging requirements.3.7 装箱后等待运输的包装箱特别是附件箱要求室存放
12、,确保包装质量不受影响。Packing case waited for transporting especially the accessory case is required in indoor storage to make sure the packing quality is not affected.4 包装方式 Packing way4.1 产品与拆卸件主要选用的包装方式有裸装、局部装和木箱装。Main packing ways chose for products and assemblies are nude packing, partial packing and woo
13、den case packing.4.2 防护包装主要分为防水包装和防震包装。Protective packaging consists of waterproof packing and shockproof packing.防水材料采用聚乙烯塑料薄膜、聚乙烯塑料复合纸,如防雨布、PE袋、防雨篷布等,其材质、性能符合GB/T 7350标准。Waterproof material adopts polyethylene plastic film and polyethylene plastic composite paper, such as waterproof cloth, PE bag
14、and waterproof tarpaulins etc. and their material and performance accord with the GB/T 7350 standard.防震材料采用聚苯乙烯泡沫塑料、复合发泡塑料、塑料气垫等。Vibration-proof material adopts polystyrence foam, compound foamed plastics and the plastic cushion etc.5 包装箱基本技术要求 General safety specification of packing case 5.1包装材质要求
15、Requirements of packaging material5.1.1包装材料的选用根据装物的特点正确选择。The selection of packaging materials should be right choice according to the characteristics of the built-in objects.5.1.2 变压器产品的包装材料以木质材料为主,其材质应在保证包装箱强度的前提下,根据经济环保原则选用非疫区的适当树种。主要受力构件的选材为落叶松、加松、铁杉、花旗松,非主要受力部位也可以选用人工合成或深度加工的木质材料。所用实木需熏蒸处理。Pack
16、aging material of transformer is given priority to with wood material which shall be under the prerequisite of the intensity of packing and to choose the appropriate tree species in unaffected areas according to the economic and environmental protection principle. Selection of main stress components
17、 are dahurian larch, pine, hemlock and douglas fir. The main stress parts also can choose synthetic or deep processing of wood materials.5.1.3同一包装箱的箱板色泽应基本一致,宽窄均匀,外表面平整,无虫眼和明显毛刺。The board color of same packing case should be consistent. It has the uniform width, flat surface and with no bug and obvi
18、ous burrs.5.1.4滑木含水率不大于24%,其它部位木材的含水率不大于20%。Wood moisture content is not more than 24% and other parts the moisture content of lumber is not more than 20%.5.1.5 制箱木材各部位允许缺陷度见表1、表2,木材中各种缺陷的解释和计算方法、斜纹的倾斜度检量方法按GB/T 155和GB/T 4823的规定。Each part ofbox wood allowing defects are shown in table 1 and table 2.
19、 Interpretation and calculation methods of various defects in wood, the inclination of the twill calibration method are according to GB/T 155 and GB/T 4823.表1 木材的缺陷限度(滑木、端木、枕木)Table 1 Defects limit of wood (slippery wood, terminal wood, crosstie )缺陷名称Name of defects 木 材 的 允 许 缺 陷 限 度allowed defects
20、limit of wood滑木、端木、枕木等主要受力构件slippery wood, terminal wood, crosstie, etc main stress components活节和死节Live and dead section 任意材长1000mm中,节子的个数不能超过5个,最大节子直径不能超过材宽的30%(死节必须修补),直径不足5mm的节子不计。滑木与枕木的钉接部位不得有死节。Any material in 1000 mm long, the number of knotis no more than 5, the diameter of biggest knot is no
21、 more than 30% of the material width ( Dead knot must be repaired.) Knot with diameter less than 5mm is not counted. Nail parts of slippery wood and crosstie can not have dead knots.腐 朽Decayed不允许 not allowed虫 孔Wormhole不允许 not allowed裂 纹Crack裂纹长度不得超过材长的20%(宽度不足3mm的裂纹不计),不允许有贯通裂纹Length of crack is no
22、more than 20% of material length ( crack with width less than 3mm is not counted), hole-through crack is not allowed.钝 棱Wane钝棱最严重的部分缺角宽度不得超过材宽的30%,高度不得超过材厚的三分之一A blunt edge of the most serious part of the missing angle width shall not exceed 30% of the material width. Height should not exceed one th
23、ird of the material thickness.弯 曲Curve顺弯、横弯不得超过1%,翘弯不得超过2% The bending and transverse bending should not exceed 1%.Crosswise concavingshould not exceed 2%.斜 纹Cross grain纹理的倾斜度不得超过20%The inclination of the texture should not exceed 20%.表2 木材的缺陷限度(箱板、箱档)Table 2 Defects limit of wood ( boxboard, cleat)
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 出口产品 运输 包装 标准 最终版
限制150内