强制性产品认证委托书申请书.docx
《强制性产品认证委托书申请书.docx》由会员分享,可在线阅读,更多相关《强制性产品认证委托书申请书.docx(10页珍藏版)》请在得力文库 - 分享文档赚钱的网站上搜索。
1、强制性产品认证委托书/申请书Letter of Authorization / Application for CompulsoryCertification认证委托人名称APPLICANT:制造商名称MANUFACTURER:生产企业名称FACTORY:认证委托日期(AUTHORIZATION DATE): 一,北京中化联合认证有限公司Beijing Zhong Hua Canbination Certification Co., Ltd.溶剂型木器涂料产品一致性清单Consistency List of Solvent-based Coating Products for Woodenwa
2、re认证委托人名称:Applicant Name:认证委托单元:Applicant Company:生产者名称:Manufacturer Name:商标:Trade Mark:生产厂名称:Factory Name:产品系列 Product Series主漆Main Paint固化剂Curing Agent稀释剂 Diluent施工配比Construction Ratio产品配方Product Ratio产品标准 代号/年代号 Product Standards Code / Age Number备注 Remarks产品型号(名称) Product Model (Name)型号 Model生产厂
3、 Factory型号 Model生产厂 Factory施工配比 Construe tion Ratio配比类型 Ratio Type配方编号Ratio No.批准日期 Approval Date说明:Description:1认证委托人(Applicant)认证委托企业名称 (Applicant Name) :相关人数(ODM 模式时,即非工厂):Number of Persons Concerned (ODM Mode, or Non-factory Mode)英文名称(如需英文证书,请完整填写):English Name (Provide complete name if an Engli
4、sh certificate is required): 注册地址:address: Chinese) : 英文地址(如需英文证书,请完整填写):Address in English (Provide complete address if an English certificateis required): 认证委托企业办公联系地址、邮编(Address & post code of Applicant):地址 (Address:) 邮编 (Post code) :联系人(请填写具体负责人)Contact (Person to be contacted) : 职务(Position): 电
5、话 (Telephone) :手机(Mobile phone) :传真(Fax) :电子邮件(E-mail) :2制造商/Manufacturer:(是否同1 .认证委托人If the same with applicant: 口是yes/否no,如否请详细填写制造 商内容 If not, please fill in the specific information) 制造商名称/Name of Manufacturer:中文名称:in Chinese:英文名称:in English:制造商地址、邮编/Address & post code of Manufacturer:2. 1 制造商注
6、册地址中文: Manufacturers registered address: 英文地址(如需英文证书,请完整填写):Address in English (Provide complete address if an English certificatei s requ ired) 2 . 2制造商实际办公地址:ufacturer:联系人/Person to be contacted:职务/Position: 电话/手机 Telephone/Mobile phone:传真/Fax:电子邮件/E-mail:3 生产厂/Factory:堤否同L施死入 If sane with the pro
7、duct factory:匚是yes/匚否no,写以下生产厂If not, please fill the specific infonnaticn of factory)堤司 2 制If sane with manufacturer: Qyes/E居no,如否,请1物膜写以下册内容If not, please fill in the ecific infcmatiai of factory)生产厂名称/Name of Factory:中文名称:in Chinese:英文名称:in English:生产厂实际生产地址/Address of Factory:中文地址:nese: 英文地址(如需英
8、文证书,请完整填写):Address in English (Provide complete address if an English certificateis required) 联系人/Person to be contacted:职务(Position):电话/手机 Telephone/Mobi 1 ephone:传真/Fax:电子邮件/E-mai 1:生产厂/商员工总数(如申证产品生产仅是其中一部分,请注明申证产品生产部分的相关人数):The total number of factory / business employees (in case the products in
9、 this application are only part of the products, please indicate the number of relevant employees of products in this application):4 申请类型 Application type 初次 First time转机构 Transfer mechanism5 有无多场所/ Are there many places 无/no 有/yes,如有,请填写附件 4 If yes, please fill in Appendix 4 6本次申请认证范围(包含产品认证单元、规格型号
10、):请另详细填写产品一致性清单或轮胎技术参数表The scope of application for certification (including product certification unit, specification, and model): Please fill in “Product Consistency List or Tires Technical Parameter List“ in detail.7 认证依据:Certification basis:强制性产品认证(Compulsory product certification):强制性产品认证实施规则 机
11、动车辆轮胎Rules of Compulsory Product Certification: Tires of Motors and Vehicles”装饰装修产品强制性认证实施规则 溶剂型木器涂料“Rules for Compulsory Certification of DecorativeProducts: Solvent Based Coatings for Woodenware8请说明生产过程、检验过程是否分包,如有请说明分包情况并附分包协议复印件。Specify if the products are sub-contracted during the production an
12、d inspection; in case the products are sub-contracted, specify the process in detail and attach the copy of sub-contraction agreement.生产过程是否有分包:If the products are sub-contracted during production: 是 Yes /.口否 No,分包情况 说明:Specify the situation:检验过程是否有分包:If the products are sub-contracted during inspec
13、tion: 是 Yes/. 否 No,分包情况 说明:Specify the situation:企业自身是否拥有具备 CNAS 认可资格的实验室:Does the enterprise have a laboratory with CNAS accreditation: 是:Yes: (台试验机、个工位)( experimenting devices; workplaces /否 No;9企业是否接受咨询:口否 口是,说明咨询人员和咨询机构名称:10检测机构选择(此为必填项,请依据HQC官网发布的HQC分包检验机构名录进行选择)Inspection mechanism selection (
14、This is required, Please select the list of HQC sub contractors according to HQCs official website)企业确认的检测机构为 The inspection organization determined by the company is:11 企业建议审核时间(Recommended audit time) :;可接受交通方式(Acceptable mode of transportation): 飞机 aircraft 火车 Train 汽车 autanobile 协商 consult12认证产品
15、生产工艺流程(请另附页单独提供生产工艺流程图附件、标注关键过程工艺控制参数,并填写关键生产设备清 单:附件1)Technological production flow chart of the products applied for HQC certificationPlease provide technological production flow chart, and fill in “List of Key Production Equipmentw Appendix 1).注:企业生产工艺过程,应以方块流程图标示,并请标明关键过程的工艺控制参数;若生产过程有分包请给予说明.No
16、te: the manufacturing process should be marked with a block flow chart, and please indicate the technological controlling parameters of key processes; in case that the products are subcontracted, please specify the situation.13 申请认证所需材料清单 List of materials required for certification13.1机动车辆轮胎产品强制性产品
17、初次认证申请材料Documents of initial compulsory HQC certification for tires of motor vehicles1强制性产品认证申请/委托书和合同 Letter of Authorization / Application for Compulsory Certification and contract2认证委托人、生产者(制造商)、生产企业的注册证明材料(如营业执照、组织机构代码证等)The registration certificate materials (such as business license, organizat
18、ion code certificate, etc.) of the applicant, the producer (manufacturer) and the manufacturing enterprise3承担对获证问题产品的召回等相关质量和法律责任的声明及符合国家相关产业政策的证明材料Declaration to undertake the recall of certified products with quality issues and other legal liabilities and evidence materials in conformity with the
19、industrial policies in China4生产一致性控制体系文件Product consistency documents5机动车辆轮胎产品技术参数表Tires technical parameter documents6主要原材料清单、关键零部件(附件 2) List of Major Raw Materials, Key Components and Suppliers (Appendix2)7主要检测仪器、设备明细表(附件 3) List of Major Inspection, Measuring and Test Instrument and Equipment (A
20、ppendix3)8每单元至少一份12个月内的申证产品型式试验报告(自检、委检均可);At least one inspection report on products that apply for HQC certification for each unit within 12 months (both self-inspection and entrusted inspection);生产过程、检验过程分包协议(有分包时);Sub-contraction agreement in production or inspection process (when there are sub-
21、contractions)9质量管理体系认证证书复印件(如有时)、生产者/制造商所属商标注册的证明文件复印件(如有时);A copy of the quality management system certificate (if any), a copy of the registration certificate of the producer / manufacturer (if any)10认证委托人、生产者、生产企业之间签订的有关协议书或合同,如0DM/0EM协议书、授权书及声明、质量管理体系 认证证明文件、符合相关法律法规的自我声明等材料,0DM原始CCC证书复印件(适用时);A
22、n agreement or contract signed among the applicant, the producer and the manufacturer, such as ODM/OEM agreement, letter of authorization and declaration, quality management system certification, self declaration in accordance with relevant laws and regulations and other materials, and the original
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 强制性 产品认证 委托书 申请书
限制150内